User's Manual

32
8
Microphone Operation
REV: In standby, press the key programmed as "REV" function to turn-
on or turn off Frequency Revrse function.
HOME: HOME channel switch, in standby
press the key programmed as "HOME"
function to switch between HOME channel and current channel.
MAIN: Main band switch, in standby press the key programmed as
"MAIN" function to choose left band or right band as Main band.
VFO/MR: Working mode switch. in standby,
press the key programmed as "VFO/MR" function to switch between
channel mode and frequency mode.
SCAN: scan function, in standby, press the
key programmed as "SCAN" function to start channel scan or frequency
scan.
SQL OFF:Turn off Squelch, in standby,
press the key programmed as "SQL OFF"
function to turn off squelch, you can hear very
weak signal, repeat the above function to turn
on squelch.
TBST: Transmit tone burst, in standby;
press the key programmed as "TBST" function
to transmit selected tone burst. This function is
use to wake sleeping repeater.
CALL OUT: Calling, in standby, press the
key programmed as "CALL OUT" function to
transmit pre-programmed DTMF, 2TONE, 5TONE code.
COMP: Compander function in standby , press the key programmed as
"COMP" to turn on or turn off Compander function.
SCR: Scrambler function, in standby, press
the key programmed as "SCR" function to turn on or turn off Scrambler
function. And choose optional scrambler
groups (from 9 xed groups and 2 self dened
groups).
TONE DEC: Add Optional Signaling, in standby press the key
programmed as"TONE DEC" function to choose DTMF(DT), 2TONE(2T),
5TONE(5T)or OFF.
W/N: Wide or narrow band setup, in standby, press the key
programmed as "W/N" function to choose Wide band, middle and narrow
band.
OFF: No function.