User's Manual

04
How to Charge
Plug the AC adapter into the AC outlet(100V-240V), then 1.
plug the cable of AC adapter into the DC jack, the indicator
will light GREEN--- this means it is waiting to charge.
Slide the battery or transceiver with battery into the charger; 2.
make sure the battery terminals are in contact with the
charging terminals well. The LED may begin ashing---
pre-charging begins.
It may pre-charge for about 5 minutes, In which once the 3.
LED stops ashing and turns into a solid RED--- the full
charging has begun.
It may take about 5-6 hours to fully charge the battery, 4.
when the LED turns GREEN— it is fully charged.
BATTERY INFORMATION
WARNING:When keys, ornamental chains, or other metals contact or short the battery terminals, the
battery could cause a shock or injury. If the battery terminals are allowed to short circuit, they will generate
a lot of heat. Be careful when you bring or use a spare battery. Put the battery or radio into an insulated
container. Do not put them into metal containers.
AC Input
Do not recharge the battery if it is already fully charged. This could shorten the life of the battery or damage ▲
the battery.
Do not charge the battery or transceiver if it is damp or wet. Dry it before charging to avoid any danger. ▲