User's Manual

22
SHORTCUT OPERATIONS
TX Power selection
When in standby, press key, the top left corner of LCD displays " " icon, then press key to
choose High/Middle/Low power for the current selected channel.
When LCD displays "
1. L" icon, it means low power has been chosen.
When LCD displays NO icon, it means middle power has been chosen.2.
When LCD displays "3. H" icon,it means high power has been chosen.
Talk Around function
When in standby, press key, the top left corner of LCD displays " " icon,
then press , the current selected channel will enable talk around, repeat the
above operation to close talk around.
TX=RX: 1. Enable talk around, current channel transmit at RX frequency, if CTCSS/
DCS signaling is set, it will interchange decoding CTCSS/DCS as encoding.
OFF: 2. Close talk around.
DTMF code Transmit and Enquiry
Press 1. key, the top left corner of LCD displays " " icon, then press key, LCD displays DTMF
data and group number (total 16groups) of current group.
When LCD displays "
1. R" icon, it means current selected channel has the frequency reverse function
enabled, the TX frequency and RX frequency are reversed, if CTCSS/DCS signaling is set, they will
also interchange.
When "2. R" icon disappears, it means that the channel is normal and is not reversed.