User's Manual

24
SHORTCUT OPERATIONS
Single-band Switching
To avoid interference from the sub channels when the main channel is in use, you can use the single band
function to turn off the sub channel band quickly.
Continuous pressing of will cycle LCD display to show Main + Sub-Band / Sub-Band Only / Main-Band
Only.
CTCSS/DCS Encode and decode
Press 1. key then press [PF2] to enter into setup.
Press [PF2] key to choose CTCSS, DCS or OFF, if you choose DCS, press 2. key to select positive
or negative code.
Rotate the channel knob to choose your desired CTCSS/DCS encode and decode.3.
Press 4. key or key to conrm and exit.