User's Manual

26
FUNCTION MENU SETUP
Note: User-defined CTCSS encode must be setup by programming software.
CTCSS/DCS Encode Setup
1. Press key, the top left corner of LCD displays " " icon, then press key to enter into function
menu.
2. Press
/ key to choose NO.01 function item, it shows "T-CDC" on LCD.
3. Press
key to choose CTCSS, DCS or OFF, when DCS signaling is selected, press key to
choose DCS positive or inverse code.
4. Rotate channel selector knob to choose desired CTCSS/DCS code.
CTCSS: 62.5HZ-254.1HZ, 51groups in total, and 1 group user-dened code.
DCS: 000N-777I, 1024 groups in total. "N" stands for positive code, "I" stands for inverse code.
5. Press
or key to conrm and exit.
CTCSS/DCS Decode Setup
If this function is enabled, you can ignore (can not hear) other unrelated call at the same frequency.
1. Press key, the top left corner of LCD displays " " icon, then press key to enter into function
menu.
2. Press / key to choose NO. 02 function item, it shows "R-CDC" on LCD.
3. Press key to choose CTCSS,DCS or OFF, when DCS signaling is selected, press key to