User's Manual

29
FUNCTION MENU SETUP
2TONE encode must be programmed by software, only the groups that have edited 2TONE can
be selected. When 2TONE encode has a name, transceiver will display name, otherwise will
display "CALL XX".
Optional signaling setup
DTMF, 2TONE (Paging), 5TONE, MSK (TERMN-8R Only) functions are similar
to CTCSS/DCS, it has special call functions, such as ANI, PTT ID, All call, Alarm,
remotely kill, remotely stun and remotely waken, etc. (MSK gives the capabilities
of Message sending and FHSS - TERMN-8R Only) .
1. Press
key, the top left corner of LCD displays " " icon, then press
key to enter into function menu.
2. Press
/ key to choose NO.06(OBLTR-8R)/NO.08(TERMN-8R) function
item, it shows "TONDEC" on LCD.
3. Rotate channel selector knob to choose desired optional signaling.
2. Press / key to choose NO.05(OBLTR-8R)/NO.04(TERMN-8R) function
item, it shows "2T-ENC" on LCD.
3. Rotate channel selector knob to choose desired 2TONE encode group.
4. Press [PTT] key to transmit selected 2TONE encode, press key or
key to conrm and exit.