User's Manual

41
FUNCTION MENU SETUP
Scanning Resume Time Setup
There are four kinds of scanning dwell time.
1. Press key, the top left corner of LCD displays " " icon, then press key
enter into function menu.
2. Press / key to choose NO.26(OBLTR-8R)/NO.41(TERMN-8R) function
item, it shows "SCAN" on LCD.
3. Rotate channel selector knob to choose desired setup.
NOTE: Individual Squelch levels per channel can be set if you have a PF1/PF2 key programmed as Squelch off.
While the Squelch is off - turn the channel selector knob which will allow a Per-Channel Squelch change.
when the receiving signal strength hits a minimum strength clarity, otherwise, the
transceiver will remain muted.
1. Press
key, the top left corner of LCD displays " " icon, then press key
enter into function menu.
2. Press / key to choose NO.25(OBLTR-8R)/NO.40(TERMN-8R) function item, it shows "SQL"
on LCD.
3. Rotate channel selector knob to choose desired setup.
00~09: 10 levels of squelch in total for optional, "00" is minimum setup value (normally open).
4. Press key or key to conrm and exit.