User's Manual

55
ADVANCED FUNCTION OPERATIONS
If the calling party uses "A8125" to call, Radio A and Radio C will receive the call.
If the calling party uses "AE125" to call, Radio A, Radio C and Radio E will receive the call.
If the calling party uses "7AE25" to call, Radio A and Radio B will receive the call.
If the calling party uses "6AEA5" to call, Radio C, Radio D and Radio E will receive the call.
If the calling party uses "AEAEA" to call, All Radios will receive the call.
NOTE:You can also set up a custom group not dependent on the user's ANI/Self ID. Under the Information
ID section - set up a Decode option for your Group's 5TONE decode. (Example: 12345, 45676543, etc…)
This transceiver can set desired PTT ID by programming software, when you press Call using 5TONE 3.
the channel set PTT ID, the transceiver will transmitting ID by pressing or releasing the PTT key (it will
default to your selected “SELF ID”). You can also initiate a “Special Call” PTTID which (depending on
the receiver’s squelch set up) will only display your ID on the receivers display without opening the
squelch.
Radio A Radio B Radio C Radio D Radio E
ID Code 78125 79225 68125 69225 65125
Remote Stun, Remote Kill and Remote Wake (this is found in your 5TONE Decode (Receive) Options 4.
via programming software)
Remote Stun: When the radio receives the 5TONE that will "Remote Stun" it - it can no longer a.
transmit and will receive only.
Remote Kill: When the radio receives the 5TONE that will "Remote Kill" it - it can no longer b.
transmit or receive.