User Manual

14
7
General Setting
In VFO mode, when this function is on, the scanning or input of frequency
will restricted within the current VFO frequency band.
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose
2.
No. 04 menu. the LCD displays "BAND".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON: Turn on VFO band lockout function
OFF: Turn off VFO band lockout function
Press the Main band selector knob or
5.
key to store value and back to function menu. Press key
or hold selector knob for over 0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose
2.
No. 05 menu. the LCD displays "BEEP".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON: Turn on Beep function.
OFF: Turn off Beep function
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
When any harmonic or image frequency in the CPU clock disturbs the
working frequency, turn on this function will cut the disturbing
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 06 menu. the LCD displays
"CLK.SFT".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON: Turn on CPU Clock frequency Change.
OFF: Turn off CPU Clock frequency Change.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No. 07 menu. the LCD
2.
displays "2TN ENC".
Press the Main band selector knob to
3.
enter function setup.
Switch the Main band selector knob to
4.
choose wanted value.
Available Values: 0-23, total 24 groups.
VFO BAND LOCKOUT
BEEP FUNCTION
CPU CLOCK FREQUENCY CHANGE
2TONE ENCODE SELECT
If the 2TONE encode are set up with name, the LCD will display
corresponding name.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
NOTE