User Manual

16
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 12 menu. the LCD displays "DSP SUB"
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to
4.
choose wanted value.
FREQ: display sub band frequency,
DC-IN: display sub band voltage.
OFF: turn off display for sub Band
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 13 menu. the LCD displays
"DTMF D".
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to choose wanted value.
4.
100MS: The Pre-Loading time is 100MS
300MS: The Pre-Loading time is 300MS
500MS: The Pre-Loading time is 500MS
800MS: The Pre-Loading time is 800MS
1000MS: The Pre-Loading time is 1000MS
Press the M
5.
ain band selector knob or key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
SUB BAND DISPLAY SETUP
DTMF ENCODE PRE-LOADING TIME
7
Press
1.
to enter function menu
Switch the Main band selector knob to
2.
choose No.15 menu, the LCD displays
"DTMF W".
Press the Main band selector knob to enter function setup.
3.
Switch the Mai
4.
n band selector knob to choose DTMF group. Then
press key back to DTMF menu.
01-16: total 16 group of DTMF code.
DTMF ENCODE SETUP
When the selected group is empty, the
5.
LCD displays '------".
Press the selector knob to enter the DTMF signaling edit. The LCD
6.
display "-- -- -- -- -- --", the last character
ashes.
Switch the selector knob to choose wanted character. Press the
7.
selector knob to confirm selected value and start edit for next
character.
Press
8.
key to store value and exit code editing. Press key
again to store setup and exit. Press key or hold selector knob
for over 0.5 second to store setup and exit.