User Manual

25
7
General Setting
TALK AROUND
MICROPHONE SPEAKER
When turn on microphone speaker, please set up Menu 52 VSPCONT to
be INT, otherwise the VHF signal can not be monitored.
NOTE
BEEP VOLUME CONTROL
1.
Press
key to enter function menu.
2.
Turn the Main band selector knob to
choose No. 53 menu. The LCD displays
“BP-VOL”.
3.
Press the Main band selector knob to enter function setup
4.
Switch the Main band selector knob to choose wanted value.
LOW: BEEP volume is low.
HIGH: BEEP volume is high.
5.
Press the Main band selector knob or
key to store value and
back to function menu.
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
INT: Use main internal speaker, the sub
internal speaker will be shut off. VHF and
UHF band share main speaker
EXT: Use sub internal speaker or external speaker, the VHF calling can
be heard from the sub speaker or external speaker.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
1.
Press
key to enter function menu.
2.
Turn the Main band selector knob to choose
No.55 menu. The LCD displays “HND SPK” .
3.
Press the Main band selector knob to enter function setup.
4.
Switch the Main band selector knob to choose wanted value
HSPKOFF: Turn off microphone speaker.
HSPK ON: Turn on microphone speaker.
MSPKOFF: Turn off Main speaker.
5.
Press the Main band selector knob or
key to store value and back
to function menu.Press
key or hold selector knob for over 0.5 second
to store setup and exit.
With this function on, the transceiver will not able to communicate with
another transceiver through a repeater.
1.
Press
key to enter function menu.
2.
Turn the Main band selector knob No.54
menu. The LCD displays “TALK”.
3.
Press the Main band selector knob to enter function setup.
4.
Switch the Main band selector knob to choose wanted value
ON: Turn on Talk Around
OFF: Turn off Talk Around
5.
Press the Main band selector knob or key to store value and
back to function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
VHF EXTERNAL SPEAKER PORT
When the function setup as external (EXT), in order to hear the calling on
VHF, user can use sub speaker or connect an external dual track speaker
(SP-02). The calling from VHF and UHF are separated in 2 tracks.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 52 menu. The LCD displays
"VSPCONT".