User's Manual

Ground

Microphone

connector

Error

http://www.qxdz.cn

Initial Installation

External Speaker

Microphone

PC Connecting

If you plan to use an external speaker, choose a speaker with an

impedance of 8Ω. The external speaker jack accepts a 3.5mm (1/8")

mono (2-conductor) plug.

For voice communications, connect a microphone equipped with an

8-pin modular plug into the modular socket on the front of the main

unit. Press rmly on the plug until the locking tab clicks. Attach the

supplied microphone hanger in an appropriate location using the

screws included in the screw set.

To utilize the optional QPS-598 software, you must rst connect the

transceiver to your PC then using an optional programming cable

PC50 (via Data socket ).

Please use QPS-598 software for programming.

External speaker adopt double port BTL, please care about the connecting

way. The speaker can not connect with the ground, otherwise the speaker

will be fault. The wrong connecting way as the following picture.

Ask your dealer about purchasing a Programming Cable PC50.

Accessories Connections

SP-01

External speaker[SP-02]

Microphone

[QHM-04]

Antenna[QCA-02]

VO L

FUNC

V/M

TX/DCS

SCA

MINI