User's Manual
13
Basic Operations
Transmitting Tone-Pulse
Transmitting OPTIONAL SIGNALING
Press and hold [PTT] key, then press Microphone [ ] key to
transmit current selected tone-pulse signal.
Press and hold [PTT] key, then press Microphone key or press
CA
LL
key in front panel or press Mic's
MINI
key to transmit pre-stored and
selected DTMF/2Tone/5Tone optional signaling.
Channel Edit
Channel Delete
Under frequency mode (VFO), turn
1.
selector knob to select the desired
frequency or input frequency by MIC's
numeric keys.
Press
2.
TX/DCS
key to enter CTCSS/DCS
signaling setup, turn selector knob to
select the desired signaling.
Press
3.
F
U
NC
key, LCD appears ,
icon and current channel number,
LFRQÀDVKLQJPHDQVFXUUHQWFKDQQHOLV
Under channel mode, turn selector knob to select channel which
1.
you want to delete.
Press
2.
F
U
NC
key and
V/M
key together, current channel will be
deleted and emitted a prompt voice. LFRQÀDVKLQJPHDQVFXUUHQW
channel is deleted.
empty.
Turn selector knob to select the desired channel number to store.
4.
Press
5.
V/M
key, , icon and channel number disappears and
emit a prompt voice, thus the channel storage succeed.
6
Please hold the microphone approximately 2.5-5.0cm from your lips
,
and then speak into the microphone in your normal speaking voice to
get best timbre.
Press and hold [PTT] key, LED lights RED and power intensity showed in
screen indicates it is transmitting, release to receive.