User's Manual

19
8
Sending 5-Tone Call
Press
2.
CA
LL
/
SCAN
key to choose No.04
menu, LCD displays "5TON XX", "XX"
indicates the group in the list.
Turn selector knob to select the desired sending 5TONE group,
3.
Press PTT to transmit selected group.
Total:100groups, 00-99, Default:00.
4.
Press
5.
T
X/DCS
NH\WRFRQ¿UPDQGH[LW
General Setting
Content and name of 5TONE will be edited by programming
software. This radio only query edited group or name. If there
is corresponding name for 5TONE, this operation will display
5TONE corresponding name.
Press
CA
LL
directly to transmit the pre-stored 5-Tone signaling.
In 5Tone signaling mode, press
CA
LL
for 2s until LCD displays
"AN---", turn selector knob to select desired digit(caller ID). In
this mode, press
TX/DCS
to confirm exist digit and move cursor to
next, press
V/M
to forward cursor.After editing, press
CA
LL
key to
operate ANI call.
Press
4.
T
X/DCS
NH\WRFRQ¿UPDQGH[LW
Sending 2-Tone Call
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu.
Press
2.
CA
LL
/
SCAN
key to choose No.03
menu, LCD displays "2TON XX", "XX"
indicates the group in the list.
Turn selector knob to select the desired
3.
sending 2TONE group, Press PTT to transmit selected group.
Total: 32groups, 00-31, Default: 00.
4.
Press
5.
T
X/DCS
NH\WRFRQ¿UPDQGH[LW
Content and name of 2TONE will be edited by programming
software.
This radio only query edited group or name. If there is
corresponding name for 2TONE, this operation will display 2TONE
corresponding name.
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu
Sending DTMF call
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu.
Press
2.
CA
LL
/
SCAN
key to choose No.05 menu, LCD displays "'70)
XX", "XX" indicates the group in the list.
Turn selector knob to select the desired
3.
sending DTMF group, Press PTT to
transmit selected group.
Total: 16groups, 00-16, Default: 00.
4.
Press
5.
TX/DCS
NH\WRFRQ¿UPDQGH[LW
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu.