User's Manual

11
5
According to practical application, you can set the radio works as
Amateur Transceiver mode or Professional Transceiver mode. There
are also 2 levels operation menu to set functions as you need. It is easy
and convenient (From No.1 to No.15 are channel function setup, From
No.15 to No.29 are general setting setup).
Working Mode:
1.
By programming software: A. In PC software's "General Setting"
menu, choose "Display Mode" to select Amateur Transceiver
mode or Professional Transceiver mode.
By manual setupB
. : Please refer to "Display Mode" in Page 25.
Amateur Transceiver Mode:
2.
Except setting as "CH" mode, others
considered as Amateur transceiver mode. Under this mode, press
V/M
key to switch between Channel mode and VFO mode .
Professional Transceiver Mode:
3.
When
set display mode as "CH", it enters
into Professional Transceiver mode.At
this mode, except scan, other shortcut
operation can't operate. And from No.1-
17 menu in function setting will be
auto-hidden, they should be set by PC
software.If there is corresponding name
for current channel, the LCD will display
current channel name Otherwise, it
shows current channel number. (As pic 4) (As pic 5)
Under every mode, from No.18-29 menu in
4.
general setting can be
changed and saved.
VFO Mode(Frequency mode)C. :
This mode shows only frequency on
the display. Shortcut operation and
Channel setting will be changed &
stored as the latest value permanently.
Once the radio is turned off or
changed to new VFO frequency, the latest setting is remained
until next change.(As pic 3)
If transceiver programmed as professional transceiver mode and
locked, you can't return to amateur transceiver mode by manual
operation from general setting.
(Pic 1)
(Pic 2)
(Pic 4)
(Pic 5)
Frequency + Channel modeA. : When set display as "FR", it
enters into Frequency+Channel
m o d e , n e w s e t t i ng o f c h a n n e l
operation and shortcut operation can
be temporarily used by user. Once
the radio is turned off or switched
to another channel, the temporary
setting will be erased and back to initial settings.(As pic 1)
Channel+Name Tag ModeB
. : When set display as "NM", it enters
into Channel+Name Tag mode. At this mode, it will display
corresponding channel name when
the current channel is edited with
name. Otherwise, it will display
frequency+channel. Its operations
are the same as frequency + channel
mode.(As pic 2)
(Pic 3)
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER)