User's Manual

26
8
Address list
You store desired ID and corresponding ID name in address list. The
LCD displays ID corresponding name if radio received ANI calling and
nd matching ID in address list.
Factory Default
If your radio seems to be malfunctioning, resetting the microprocessor
may solve the problem. When performing the reset, you may lose
memory data and stored information. Back up or write down important
data before performing the reset.
General Setting
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu.
Press
2.
CA
LL
/
SCAN
key to choose No.29
menu, LCD displays "RESTORE".
Turn selector knob to select the desired
3.
operation.
FACT:Resum e fa ctory def a ult for
channel, signaling and general setting.
SETUP:Return initial setup for No.18-
No.27 general setting menu.
Press
4.
MHz
key to conrm.
You can operate the transceiver by keypad or input desired frequency
Press and hold
1.
F
U
NC
key for over 2s to enter general setting menu.
Press
2.
CA
LL
/
SC
AN
key to choose No.28
menu, LCD displays "BOOK".
Press
3.
MHz
to enter into ID setting, press
CA
LL
/
SC
AN
to select the desired group
(00-127, total is 128 group ID).Turn
selector knob to select desired number,
press
TX/
DC
S
conrm and move cursor to
next edition, press
V/M
to clear out all
digits.
After finishing edition, press
4.
MHz
to
conrm and enter into edition of current
group's ID corresponding name.Turn selector knob to select
desired letter, press
TX/DCS
to move cursor to next edition, Press
MHz
to clear out all letters. 00-127, total 128 group ID and corresponding
ID name.
Press
5.
MH
z
to confirm and return into main menu. Repeat above
Step 3 and Step 4 operations to edit multi-ID and corresponding ID
name.
Press
6.
T
X/
DCS
key to return into standby status.