User's Manual

23
8
menu, LCD displays "D--XXX", "XXX" is radio's DTMF SELF ID.
Press
3.
key to conrm and exit.
Radio's 5TONE SELF ID ENQUIRY
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.17
menu, LCD dis plays " F--XXXXX",
"XXXXX" is radio's 5TONE SELF ID.
Press
3.
key to conrm and exit.
Voice Prompt
The prompting tone provides confirmation of entry, error status or
malfunctions of the transceiver. You can enable or disable this function.
Press and hold
1.
key for over 2s to
enter general setting menu.
Press
2.
/ key to choose No.18
menu, LCD displays "BEEP--ON".
Turn selector knob to select the desired
3.
setting.
ON: Enable voice prompt
OFF: Disable voice prompt
Press
4.
key to conrm and exit. Default:ON.
TOT (Time-out timer)
The time-out timer limits the amount of transmitting time. When you
reach the time limit which has been programmed by your dealer, your
transmission will be cut off. In order to transmit again, you must release
PTT button to reset the timer.
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.19
menu, LCD displays "TOT--3".
Turn selector knob to select the desired
3.
setting.
Timer: 1-30min, each level 1min
OFF: Disable TOT
Press
4.
key to conrm and exit. Default:3.
APO (Auto power off)
Once APO is activated, the radio will be automatically switched off when
the pre-set timer is running to end.
Press and hold
1.
key for over 2s to enter general setting
menu.
Press
2.
/ key to choose No.20
menu, LCD displays "APO--OFF".
Turn selector knob to select the desired
3.
setting.
30MIN: Auto power off after 30m
General Setting
Suggestion:Enable this function to check incorrect operation and
malfunctions.