User's Manual

13
Basic Operations
Transmitting Tone-Pulse
Transmitting OPTIONAL SIGNALING
Press and hold [PTT] key, then press Microphone [ ] key to
transmit current selected tone-pulse signal.
Press and hold [PTT] key, then press Microphone key or press
key in front panel or press Mic's key to transmit pre-stored and
selected DTMF/2Tone/5Tone optional signaling.
Channel Edit
Channel Delete
Under frequency mode (VFO), turn
1.
selector knob to select the desired
frequency or input frequency by MIC's
numeric keys.
Press
2.
key to enter CTCSS/DCS
signaling setup, turn selector knob to
select the desired signaling.
Press
3.
key, LCD appears ,
icon and current channel number,
icon ashing means current channel is
Under channel mode, turn selector knob to select channel which
1.
you want to delete.
Press
2.
key and key together, current channel will be
deleted and emitted a prompt voice.
icon ashing means current
channel is deleted.
empty.
Turn selector knob to select the desired channel number to store.
4.
Press
5.
key, , icon and channel number disappears and
emit a prompt voice, thus the channel storage succeed.
6
Please hold the microphone approximately 2.5-5.0cm from your lips

,
and then speak into the microphone in your normal speaking voice to
get best timbre.
Press and hold [PTT] key, LED lights RED and power intensity showed in
screen indicates it is transmitting, release to receive.