User's Manual

21
8
TX OFF SETUP
Disable this function, it is invalid to press PTT, current channel only
works in RX mode.
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.09 menu, LCD displays "TX-
ON".
Turn selector knob to select the desired
3.
setting.
ON: In current channel, Press PTT to
transmit.
OFF: In current channel, Press PTT is
invalid.
Press
4.
key to conrm and exit. Default:ON.
Busy Channel Lockout
BCLO is to disable transmitting while RX signal is received. Once the
channel is busy and you press PTT, the radio will beep as warning and
get back to receiving.
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.10 menu, LCD displays
"LOCK--OFF".
Turn selector knob to select the desired setting.
3.
BU: Enable

BCLO, Carrier lockout, transmitting is inhibited when
current channel receives a matching
carrier; press [PTT] to emit error voice
prompt and back to receiving status.
RL: Enable

BTLO, transmitting is inhibited when current channel
receives a matching carrier but dis-
matching CTCSS/DCS. Press [PTT]
to emit error voice prompt and back to
receiving status.
OFF:

Busy channel lockout is disabled.
It can transmit in any receiving status.
Press
4.
key to conrm and exit.
Press and hold
1.
key for over 2s to
enter general setting menu.
Press
2.
/ key to choose No.11
menu, LCD displays cursor and ashing.
Turn selector knob to select the desired letter, press
3.
key to
conrm selected letter and enter into next edition, Press
to
return forward edition.
After edition, press
4.
key to exit.
Reverse TX/RX
General Setting
Editing Channel NAME
In Frequency (VFO) mode, this function will be auto-hidden.
TX frequency turns to RX frequency & RX frequency changes to TX
frequency. The signaling will also be reversed if CTCSS/DCS signaling
exited in this channel.
Press and hold
1.
key for over 2s to enter general setting menu