User's Manual

Professional

FM Transceiver

SUMMARY

NOTE: If all LED lights have set off, then the screen will not lights up when power on. The

transceiver sounds beep to indicate radio power on successfully. If the user prohibit volume/voice

prompt function,no voice for power on.

Power on the radio

Adjust Volume

Turn on the radio by turning the Volume switch clockwise till a click is heard, and you will hear a

Power up beep if the dealer has set it. Then the screen display DMR and the radio name you have

edited. LED lights green, if the backlight have been set auto open, then the screen lights up.

Rotate the Power/Volume knob to adjust the volume. Turn clockwise to increase the volume and

counterclockwise to decrease the volume.