User's Manual

Professional
FM Transceiver
40
FUNCTION MENU SETUP
Radio Enable
Scan Lists
The display shows Radio Disable: <Subscriber Alias or ID>and the LED lights up RED.5.
If successful, a tone sounds and the display shows Radio Disable Successful. OR If not 6.
successful, a tone sounds and the display shows Radio Disable Failed. When disabled the radio,
do not press [
B
A
C
K
]
, because you will not get the acknowledge info.
Procedure:
Press [ 1.
MENU
] to access menu.
Press [ 2.
/
]
to Contacts and press [
MENU
] to select.
Press [ 3. /
]
to the required alias or ID and press [
MENU
] to select. OR Press [ /
]
to
Manual Dial and press [
MENU
] twice to select. Input the subscriber alias or ID and press [
MENU
] .
Press [ 4.
/
]
to Radio Enable and press [
MENU
] to select.
The display shows Radio Enable: <Subscriber Alias or ID>.5.
If successful, a tone sounds and the display shows Radio Enable Successful. OR If not 6.
successful, a tone sounds and the display shows Radio Enable Failed. When enable the radio, do
not press [
B
A
C
K
]
, because you will not get the acknowledge info.
Scan lists are created and assigned to individual channels/groups. Your radio can support up to
250 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of both
analog and digital entries. You can add, delete, or prioritize channels by editing a scan list.
Call 1
Radio Enable: