User's Manual

Professional
FM Transceiver
42
FUNCTION MENU SETUP
Starting and Stopping Scan
Responding to a Transmission During a Scan
Press the Scan button/ OR follow the scan menu.
Use the Channel Selector Knob to select a channel with a scan list.1.
Press [ 2.
MENU
] to access the menu.
Press [ 3.
/
]
to Scan and press [
MENU
] to select
The display shows Turn Off if scan is disabled. OR The display shows Turn On if scan is enabled.4.
Press [ 5.
MENU
] to select.
The LED blinks red and shows scan icon when Scan is enabled. Or the LED turns off and without 6.
scan icon when Scan is disabled.
During scanning, your radio stops on a channel/group where activity is detected. The radio stays
on that channel for a time period known as "hang time"
Procedure:
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If digital channel and 1.
the Channel Free Indication feature is enabled, you will hear a short alert tone the moment
the transmitting radio releases the [PTT] button, indicating the channel is free for you to
respond.
Press the [PTT] button during hang time. The RED LED turns on.2.
Release the [PTT] button to listen.3.
If you do not respond within the hang time, the radio returns to scanning other channels/groups.4.