User's Manual

Professional
FM Transceiver
21
FUNCTION INTRODUCTION
Turn on/off by " Lone Work On/Off" key, in order to make sure the holder is safety when the radio in
lone work mode. While transceiver in lone work state, the transceiver will send alert tone to remind
the user when the predetermined working time is reached, and you need press " Lone Work" key to
state in a safe condition, otherwise the transceiver will in automatic alarm mode.
Scan
Scan
Lone Work
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group sequence specied in the scan list for the current channel/
group.
Your radio can support up 250 scan lists, with a maximum of 16 members in a list.
1.Scan lists
When you start a scan, your radio cycles through the scan list looking for voice activity. The LED
blinks Orange while in scan mode.
will be no response (call) from the target radio unless you press the PTT button to initiate the call.
Silent w/Voice: Radio transmits an alarm signal and is able to receive an incoming call without any
audio until you press PTT button to initiate or response to the call.
Turn on/off Emergency mode by " Emergency On/Off " key.