User's Manual
Professional
FM Transceiver
4
BATTERY INFORMATION
WARNING: If the battery terminals short circuit, it will generate a lot of heat and possibly a fire.
When using or storing the radio (or just the battery), keep keys and other metal objects away from
the battery terminal contacts.
How to Charge
Plug the AC adapter into the AC outlet, and then plug 1.
the cable of the AC adapter into the DC jack located
on the back of the charger. The indicator lights orange
(1s) and then goes out indicating it is ready to charge.
Plug the battery or transceiver equipped with battery 2.
Into the charger. Make sure that the battery terminals
In contact with the charging terminals well. The
indicator light turns to twinkling red, meaning pre-
charging begins.
After pre-charging for about 5 minutes, the indicator 3.
light will stop twinkling, meaning charging begins.
It takes approximately 4 hours to fully charge the battery. When the lamp lights green, the 4.
charging is îš¿nished. Remove the battery or the transceiver equipped with battery from socket.