User's Manual
Professional
FM Transceiver
17
FUNCTION INTRODUCTION
6.Receiving an All Call
7.Making a Radio Call
8.Making a Group Call
An All Call is a call from an individual radio to every radio on the channel. It is used to make
important announcements requiring the user's full attention.
When you receive an All Call:
A Tone sounds and the Green LED turns on.1.
If there is no voice activity for predetermined period of time, the call ends. If the Channel Free 2.
Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio
release the [PTT] button, indicating the channel is now available for use. You can not respond to
an All Call.
NOTE:
the radio stops receiving the All Call if you switch to a different channel while receiving
the call. During an All Call, you will not be able to use any key functions until the call ends.
To make a call to a group of users, your radio must be congured as part of that group.
Turn the Channel Selector Knob to select the channel with the active group name or ID.1.
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.2.
You can select a channel, subscriber ID, or group by Using:
The Channel Selector Knob ●