User's Manual
Professional
FM Transceiver
24
FUNCTION INTRODUCTION
3.Turning the Voice Operating Transmission (VOX) Feature On or Off
This feature allows you to initiate a hands-free voice activated call on a channel. The radio
automatically transmits for a period, whenever the microphone detects voice.
Pressing the PTT key during radio operation will disable VOX. To re-enable VOX, do one of the
following:
Turn the radio off and powering it on again. Or change the channel via the Channel Selector Knob,
OR Following the procedure below.
NOTE: Turn this feature on or off limited to radios with this function enabled. Check with your
dealer or system administrator for more information.
Press " Vox On/Off" key, turn on or turn off this function.1.
If the permission call alert tone is active, you can use the touch key to send the call. Wait for the 2.
Talk Permit Tone to nish ( if enabled) and speak clearly into the microphone.
If need, you can enable or disable all radio's tune and alert tone ( except for incoming emergency
alert tone)
Press " All Alert Tone On/Off" key.1.
You will hear a conrm alert tone, that's mean turn on all tune and alert tone function, or you will 2.
hear an unconrmed alert tone, that's mean turn off all tone and alert tone.
4. Turn on/ off radio tune/ alert tone.