User's Manual

BASIC OPERATIONS

Frequency Input by Keypad

Under frequency mode or FM radio frequency mode, you can directly enter frequency through keypad.

1. When your transceiver is under Channel mode, press

key to switch into VFO.

NOTE: When the transceiver is under Channel mode, it shows current channel

number on the right of main frequency.

2.Enter the desired frequency by keypad.

NOTE: The frequency input of main channel or FM radio is relevant to the stepping

and transceiver frequency range. If frequency setup is beyond range or not matching with step size, the

input is unavailable. Under the FM radio mode, the frequency step size input by numeric keys is 100k.

Channel Input by Keypad

Under channel mode of transceiver or FM radio, you can switch to desired channel

by entering three numbers (001-199). If the entered channel is not in edited channel

range, the transceiver will emit beep to prompt wrong input and return to current

channel. For example, entering 001 is channel 1, 030 is channel 30, 125 is channel

125.