User's Manual

Note:

Under the talk around state, the transc eiver can not

communicate with other transceivers via repeaters.

ADVANCE OPERATIONS

Battery Capacity Enquiry

Pressing the programmed "Battery Capacity Enquiry", the

transceiver will announce current battery capacity. There are 10

grades in total. Grade 10th means full battery capacity.

When the battery state is grade 1th(6.1V), the LED lights red. The

transceiver will voice prompt users to charge timely and also enter

automatically the state of no transmission.

Call Alert

This function is to inform users of the coming call which is not yet

received.

Under the standby state, press the programmed key of Call, the

transceiver emits calling signal. When the receiver gets the calling

signal, the transceiver will remind him of the call by programmed

way.

Five call prompting ways:Vibration, ring (chord 1), ring (chord 2),

Vibration + ring (chord 1), vibration + ring (chord 2),Default: vibration

+ ring (chord 1) as missed call prompting.

NOTE:

Transceiver’s vibration function is optional. When there is no

vibration function, only ring is available for Call Alert.

Temporary Deletion of the Interfering Channel

This function can temporarily delete the interfering channel or

occupied channel from scan list. When scan rests on one channel,

pressing the programmed key of Temporary Deletion of the

Interfering Channel, transceiver emits "Du" beep and temporarily