User's Manual
13
Dimensions
QTG60 series
TWS45 TWA45
QTG70 series
TWS80 TWA80
■
QTG60ML-WIZ/ QTG70ML-WIZ -
Direct Mounting Type Model
PCD 40
PCD 30
3-Ø5 HOLES
3-Ø5 HOLES 3-Ø5 HOLES
PCD 50
Min.Ø5 CABLE ENTRY
Min.Ø5 CABLE ENTRY
Min.Ø5 CABLE ENTRY
■
QTG60ML-WIZ / QTG70ML-WIZ -
Direct Mounting Type Model
QTG70ML-WIZ
QTG60ML-WIZ
Mounting Hole Specications
①
Machine holes on the mounting surface referring to the diagram below.
② Remove the ange nuts from bolts and place the product through the mounting surface holes.
③ Fasten the ange nuts on the opposite side of the mounting surface until the product is tightened securely.
Buzzer volume is reduced by sliding
the volume control lever to the left
as show in the diagram to the left.
( Min. 65±4dB/m )
Raise/ Increase the buzzer volume
by sliding the control lever to the
right as shown in the diagram to
the left.
( Max. 85±4dB/m )
Buzzer Sound Volume Adjustment Instructions
Mounting Accessories (Sold Separately)
• Please refer to the dimensions below for installation of mounting brackets.