User's Manual

6 7
(2) Installation of PC Application
• The PC application is used to monitor, set, and control the status information of a wireless signaling device.
• In case of using C# Library, please refer to the Library User Manual which is provided separately.
• Please download the PC Application from our website and install it.
Information of wireless system
4. Installation of PC Application
(1) SERIAL TO USB DRIVER installation
• There are two options of receiving & controlling the wireless signaling device such as USB DONGLE and USB interface with the
GATEWAY. In both cases, `USB to serial device driver’ should be installed (download it from Qlight website or http://blog.qlight.com).
• Select x64 or x86 EXE. le depending on your OS type.
• Silicon Labs’ drivers are provided as a device driver.
• After the installation completes, check if COM# Port is displayed in the Device Manager of PC before connecting the USB DONGLE or the
GATEWAY through a USB PORT.
• COM# can vary depending on the PC environment.
<= Please run .exe le. Software VERSION may be upgraded without notice.
**For the installation instruction and usage, please refer to manual.
(3) For the usage of API using DLL, please refer to manual.