User guide

2–FastFabric TUI Menu
Fast Fabric InfiniBand Externally Managed Switch Setup/Admin Menu
2-14 IB0054607-01 A
Figure 2-5. Fast Fabric IB Switch Setup/Admin Menu
Menu Items Description
Selecting items 0 through 9 or a will change the item from skip to perform.
Selecting N will unselect all items and X will exit the menu system. The items are
described below.
Edit Config and Select/Edit Switch Files
(Switch) This will permit the fastfabric.conf, ports, and ibnodes files to be
edited. The
fastfabric.conf file controls the default operation of the FastFabric
Tools. The values specified in the
fastfabric.conf specify the defaults that will
be used for all FastFabric operations performed using this o access the fabric(s)
being used. Existing environment variables will override the values in this
ports
file. The
ibnodes file selected and created using this menu should list Externally
Managed 12000 and 9024FC Switches that are to be used. After editing the three
files, an opportunity is given to edit them again or continue forward.
Do you want to edit/review/change the files? [y]:
The default will repeat the editing process, answer n to continue forward.
Fast Fabric IB Switch Setup/Admin Menu
Externally Managed Switch List: /etc/sysconfig/iba/ibnodes
Setup:
0) Edit Config and Select/Edit Switch Files [ Skip ]
1) Test for Switch Presence [ Skip ]
2) Verify Switch Firmware [ Skip ]
3) Update Switch Firmware [ Skip ]
4) Setup Switch Basic Configuration [ Skip ]
5) Reboot Switch [ Skip ]
6) Report Switch Firmware & Hardware Info [ Skip ]
7) Get Basic Switch configuration [ Skip ]
Admin:
8) Report Switch VPD Information [ Skip ]
9) Generate all Switch Problem Report Info [ Skip ]
Review:
a) View iba_switch_admin result files [ Skip ]
P) Perform the selected actions N) Select None
X) Return to Previous Menu (or ESC)