User guide

2–FastFabric TUI Menu
Fast Fabric InfiniBand Externally Managed Switch Setup/Admin Menu
IB0054607-01 A 2-17
Reboot Switch
(Switch) This will run the iba_switch_admin reboot command to reboot all the
switches listed in the /etc/sysconfig/iba/ibnodes file that was created in a
previous step.
Report Switch Firmware & Hardware Info
(Switch) This will run the iba_switch_admin info command to provide a
summary of the present state for all the selected switches.
The information reported by this option includes:
 Firmware Version
 Hardware Version
 Hardware Part Number
 Switch Capability (SDR, DDR, or QDR)
 Present Fan Status
 Present status of both power supplies (in some models the second power
supply is optional)
If information fails to be reported for any switches, use the View
iba_switch_admin result files option to review the result files from the update.
Refer to FastFabric Command Line Interface Reference Guide for more details.
Get Basic Switch configuration
(Switch) This will run the iba_switch_admin -S -L
/etc/sysconfig/iba/ibnodes getconfig
command to retrieve basic
information from externally managed switch such as: MTU, VL Cap, Credit
Distribution, Link Width, Link Speed and node description.
The following files are produced from this selection:
 test.res - appended with summary results of run
 test.log - appended with detailed results of run
 save_tmp/ - contains a directory per failed operation with detailed logs
 test_tmp*/ - intermediate result files while operation is running
NOTE:
This only operates on QLogic 12200 switches. Any 9024FC switches
selected will be skipped without change.