User`s guide

3–Viewing Router Information
FC Ports
3-14 ISR645610-00 B
Advanced Configuration
The Advanced Configuration page provides additional configuration options for
the selected Fibre Channel port, as shown in Figure 3-8.
Figure 3-8. FC Port: Advanced Configuration Page
The Advanced Configuration page contains the following options:
 Connection Options lists the available connection types: Loop Only, Point
to Point Only, and Loop Preferred, Otherwise Point to Point. When a
Fibre Channel port is not part of an FCIP route, it only operates in Fibre
Channel loop mode.
 Data Rate lists the data rate options: Auto, 2 Gbps, 4 Gbps, or 8 Gbps. The
default is Auto.
 Frame Size lists the frame size options: 512, 1048, or 2048 bytes. The
default is 2048.
 Execution Throttle lists values of 16, 32, 64, 128, or 256. The default is 64.
 If you make any changes on this page, click Save to preserve those
changes.
Statistics
The Statistics page for the selected Fibre Channel port contains a table of
parameters and their values, as shown in Figure 3-10.