Installation guide

17
Figure 12. Locating the Blade Serial Number in the GUI
Finding the Serial Number on the Physical Blade
The iSR6200 products have the serial number printed on the bottom of the blade. For a detailed procedure for removing
the blade, refer to the iSR6200 QLogic intelligent Storage Router (iSR) Installation Guide, “Removal and Replacement”
chapter. You can view the installation guide online at QLogic.com
on the Downloads and Documentation page for your
model number.
Figure 13 shows the labeling on a QLogic iSR6200 Series blade:
Figure 13. Locating the Blade Serial Number on the Physical Blade
Congratulations! You have now successfully installed your QLogic
iSR6200, mapped target LUNs to an iSCSI initiator on your server, and
determined the blade serial number. Your server should see the Fibre
Channel LUNs through the server’s volume manager.