User`s guide

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-81
Set Secondary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration<port selection>4. Set Secondary Boot Target
Information
From the BIOS/UEFI Settings Menu, select the Set Secondary Boot Target
Information option to set the secondary boot target. For example:
Target ID: 2 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 2
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk0
Alias:
State: Session Active
Target ID: 3 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk1
Alias:
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk2
Alias:
State: Session Active
Target ID: 6 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 6
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk4
Alias:
State: Session Active
Enter a Target ID:3
Enter a LUN Number[0,(default 0)]:
Clear Primary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration<port selection>5. Clear Primary Boot Target
Information
From the BIOS/UEFI Settings Menu, select the Clear Primary Boot Target
Information option to clear the primary boot target device.
Clear Secondary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration<port selection>6. Clear Secondary Boot Target
Information
From the BIOS/UEFI Settings Menu, select the Clear Secondary Boot Target
Information option to clear the secondary boot target device.
Set Alternative Client ID
2. CNA iSCSI Configuration5. Boot Devices Configuration<port selection>7. Set Alternative Client ID
From the BIOS/UEFI Settings Menu, select the Set Alternative Client ID option
to set an alternative client ID.