User`s manual
Table Of Contents
- Preface
- General Description
- Installation
- Introduction
- Unpack
- Place or Mount the Equipment
- Apply the IEC Class 1 Laser Information Label (If the installation is in Europe)
- Install GBICs
- Connect to AC Power
- Switch Logic Power Good LED
- Check the Power-On-Self-Test (POST) Results
- Cable Fibre Channel Devices to the Switch
- Configure the Chassis
- Configure the Ports
- Zoning
- Rack and Shelf Administration
- Operating the Switch
- Diagnostics/Troubleshooting
- Removal/Replacement Procedures
- Multi-Chassis Fabrics
- Reference Information
- QLogic Customer Support
- Index

Preliminary
Index
SANbox-16STD Fibre Channel Switch
4 Index 59012-03 Rev. A Installer’s/User’s Manual
connector 1-22
supply 3-1, A-4
switch 1-19
power source loading A-4
Power-On-Self-Test 1-10, 2-8, 3-2
private devices 2-10
PROM Checksum Failure 3-4
public device
description 2-9
example 2-15
public loop example 2-14
R
rack
administration 2-23
mount 2-3
RAID 2-17
RAM Failure 3-4
reference information A-1
regulatory certifications A-5
removal/replacement procedures 4-1
rubber feet 1-10, 2-4
S
safety
notices 1-3
standards A-5
SANsurfer 1-5, 1-8, 1-15
scalability A-2
segmented loop
example 2-16
features 1-4
overview 1-3
zone 1-13, 2-19, 2-22
Segmented Loop Port - See SL_Port.
shelf
administration 2-23
mount 2-2
Simple Network Management Protocol 1-16
SL Private Loop stage type 1-5
SL_Port
AL_PAs 1-4
classes of service supported 1-5
communication restrictions 1-4
device discovery 1-4
features 1-4
frame types supported 1-5
management 1-5
number of 1-4
number of devices 1-4
number of segments 1-4
overview 1-3
SNMP - See Simple Network Management Protocol
software support B-2
stage type
Cross-Connect 1-10, 5-2
Input-Output/Transfer 1-10, 5-2
SL Private Loop 1-5
support 1-8
Switch ASIC Test Failure 3-5
Switch Auto-Route Test Failure 3-7
Switch Bus Test Failure 3-6
Switch Logic Power Good LED 1-19, 1-20, 2-8
switch management
connector 1-22
features 1-11
tools 1-15
Switch Management Port Failure 3-7
switch specifications A-2
system processor A-3
T
T_Port
cable length 5-16
configuration 2-20
copper connection 5-16
Cross-Connect 5-11
fiber optic connection 5-16
multistage 5-11
rules for IO/T chassis 5-11
TCP/IP 1-6
Telnet 1-15
temperature A-4
Test Mode switch 1-19, 2-23, 3-2
test/failure descriptions 3-4
TFTP - See Trivial File Transfer Protocol.
TL_Port
auto learning 1-8
communication restrictions 1-8
connectivity 1-5
devices 1-5
features 1-7
frame support 1-8
management 1-8
name server registration 1-8
number of devices 1-7
number of off-loop devices 1-7
overview 1-5
private initiators 1-8, 2-20
private targets 1-7, 2-20
public initiator 1-6
public targets 1-8
topologies supported 1-6
translation entries list 1-7, 2-20
zoning 1-8
topology