User`s guide

3–Interactive Commands
Target/LUN List Menu (Command Line Options -t and -l)
SN0054614-00 K 3-45
Here is an example of the All Targets option.
Note: 0 to return to Main Menu
Enter Selection: 3
------------------------------------------------------------------
HBA Instance 5: QLA2300 Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 PortID
11-05-EF
------------------------------------------------------------------
Path : 0
Target : 0
Device ID : 0x85
Product Vendor : SEAGATE
Product ID : ST136403FC
Product Revision : FF5F
Serial Number : LT06464600001011HGGH
Node Name : 20-00-00-20-37-1A-6B-CF
Port Name : 21-00-00-20-37-1A-6B-CF
Port ID : 11-01-E4
Product Type : Disk
LUN Count(s) : 1
Status : Online
---------------------------------------------------------------
And so forth.
All LUN(s)
4: Target/LUN List n: Port Number 3: All LUN(s)
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about all LUNs for all adapter port instances:
 Product Vendor
 Product ID
 Product Revision
 LUN
 Size (in GB or MB)
 Type (for example, magnetic disk)
 WWULN (world-wide unique LUN name)
 OS LUN Name (on Solaris and Linux)
Here is an example of the All LUNs information:
NOTE:
 In the Solaris OS, the QLA adapter driver supports a maximum of 256
LUNs.
 In the Solaris OS, the QLC adapter driver supports a maximum of 16K
LUNs.