User`s guide

7 – Setting Up Connections
Viewing HBA Port and Device Information
FS0054603-00 C 7-35
Q
7.5.1.2
Enabling and Disabling LUN Masking on Individual LUNs
NOTE: You can also use the LUN Masking Wizard to enable and disable LUN
masking on individual LUNs (see section 7.3).
You can configure LUN masking for a specific LUN as enabled or disabled. In the
LUN Configuration dialog box Enable column, do one of the following:
■ Select the Enable check box to enable LUN masking.
■ Clear the Enable check box to disable LUN masking.
7.6
Viewing HBA Port and Device Information
From the Fibre Channel Port Configuration dialog box, you can view HBA port
information. You can view device (disk and tape) information from the Fibre
Channel Port Configuration and LUN Configuration dialog boxes.
NOTE: See section 9 for information about viewing host, HBA, HBA port, device
(disk and tape), and LUN information from the tabbed pages.
7.6.1
Viewing HBA Port Information
Perform the following steps to view HBA port information from the Fibre Channel
Port Configuration dialog box:
1. Right-click in the HBA Port n column heading. From the pop-up menu, select
HBA Port Information. The HBA Port Information dialog box displays (see
figure 7-17).
Figure 7-17. HBA Port Information Dialog Box