Manualshelf

User`s guide

ManualsBrandsQlogic ManualsAdapterSANsurfer FC HBA Manager
171172173174175176177178179180
11 – Updating the HBA
Updating the HBA Port Settings, Advanced HBA Port Settings, and Boot Device
11-10 FS0054603-00 C
Q
The default settings for the QLA200/QLA2xxx HBA are listed in table 11-2 and
described in the following paragraphs.
Table 11-2. Advanced HBA Port Settings
Setting
Modifiable
HBAs
Options Default
Operation Mode QLA23xx HBA 0—Interrupt for every I/O
completion
5—Interrupt when interrupt
delay timer expires
6—Interrupt when interrupt
delay timer expires or no
active I/O
0—Interrupt for every I/O
completion
Interrupt Delay Timer QLA23xx HBA 0–255 0
Execution Throttle QLA23xx HBA
QLA22xx HBA
1–256 16
Enable Extended Error
Logging
QLA23xx HBA
QLA22xx HBA
QLA200 HBA
Enabled, Disabled Disabled
Login Retry Count QLA23xx HBA
QLA22xx HBA
0–255 8
Enable LIP Reset QLA23xx HBA
QLA22xx HBA
Enabled, Disabled Disabled
Port Down Retry Count QLA23xx HBA
QLA22xx HBA
0–255 8
Enable LIP Full Login QLA23xx HBA
QLA22xx HBA
Enabled, Disabled Enabled
Link Down Timeout QLA23xx HBA
QLA22xx HBA
0–255 seconds 15
Enable Target Reset QLA23xx HBA
QLA22xx HBA
Enabled, Disabled Disabled
Fast Error Reporting QLA23xx HBA
QLA22xx HBA
Enabled, Disabled Disabled
Link Down Error QLA23xx HBA
QLA22xx HBA
Enabled, Disabled Enabled
LUNS per Target QLA23xx HBA
QLA22xx HBA
0, 8, 16, 32, 64, 128, 256 8