User`s guide

11 – Updating the HBA

Updating the FCode

11-18 FS0054603-00 C

11.4

Updating the FCode

NOTE: The SANsurfer FC HBA Manager update FCode feature is available only

on Solaris SPARC systems. It is not available on Windows 2000/Windows

Server 2003, NetWare, nor Red Hat/SuSE Linux (the Update FCode

button does not display on the Utilities tabbed page).

Perform the following steps to update the FCode:

1. In the SANsurfer FC HBA Manager main window Manager main menu HBA

tree, select the HBA port.

If you want to configure multiple HBA ports with the same settings, hold the

CTRL key while selecting multiple HBA ports. The HBAs must be in the same

series (QLA23xx HBAs, QLA22xx HBAs, or QLA200 HBAs).

NOTE: Only the Settings (HBA Port Settings and Advanced HBA Port

Settings) and Utilities tabbed pages can be configured for multiple

HBA ports; therefore, the remaining tabbed pages do not display

when multiple HBA ports are selected.

2. Click the Utilities tab. The Utilities tabbed page displays (see figure 11-10).

Figure 11-10. Utilities Tabbed Page (Solaris SPARC)