User`s guide

11 – Updating the HBA
Updating the HBA Driver
11-22 FS0054603-00 C
Q
11.6
Updating the HBA Driver
NOTE: The SANsurfer FC HBA Manager HBA driver update feature is available
only on Windows 2000/Windows Server 2003 systems. It is not available
on Red Hat/SuSE Linux nor NetWare (the Update Driver button does not
display on the Utilities tabbed page).
Perform the following steps to update the HBA driver. If you select a QLA23xx HBA,
all QLA23xx HBAs on the host will use the same driver. If you select a QLA22xx
HBA, all QLA22xx HBAs on the host will use the same driver. If you select a QLA200
HBA, all QLA200 HBAs on the host will use the same driver.
1. In the SANsurfer FC HBA Manager main window HBA tree, select an HBA port.
NOTE: You can select only one HBA from the HBA tree; you cannot select
multiple HBAs when updating the HBA driver.
2. Click the Utilities tab. The Utilities tabbed page displays (see figure 11-12).
Figure 11-12. Utilities Tabbed Page