User`s guide

5 – Installing SANsurfer FC HBA Manager
Initial Installation
FS0054603-00 C 5-13
Q
A list of the autodetected Windows 2000/Windows Server 2003 drives mapped
to NetWare server system volumes (sys:\) displays.
Perform the following steps to select the Windows 2000/Windows Server 2003
drives on which to install the NetWare agent. Each drive must be mapped to a
NetWare server system volume (sys:\).
a. As appropriate, select one or more autodetected drives. In figure 5-10, for
example, H, N, and Q can be selected; N and Q are selected.
b. If a Windows 2000/Windows Server 2003 drive that you want to select has
not been mapped to the NetWare server system volume, do the following:
❑ Leave the Novell NetWare Disk Selection dialog box open. From the
Exploring window, point to Tools and select Map Network Drive to map
the Windows 2000/Windows Server 2003 drive to the NetWare Server
system volume (sys:\).
❑ From the Novell NetWare Disk Selection dialog box, type the drive letter
in the Enter Drive Letter box and then click Enter Drive Letter. In
figure 5-10, for example, you could type C in the Enter Drive Letter box
and then click Enter Drive Letter.
c. Click Next.
11. The Install Complete dialog box displays (see figure 5-11). Click Done.
Figure 5-11. Install Complete Dialog Box
12. Customize the SANsurfer FC HBA Manager and set your security parameters
(see section 6).