User`s guide

6 – Getting Started
Setting the Configuration Change Alarm Option
FS0054603-00 C 6-11
Q
2. In the Warning Displays section, do one of the following:
❑ Select the Enable Warning Displays check box if you want the warning
dialog boxes to display.
❑ Clear the Enable Warning Displays check box if you do not want the
warning dialog boxes to display. This is the default.
3. Click OK to return to the SANsurfer FC HBA Manager main window.
6.7
Setting the Configuration Change Alarm Option
SANsurfer FC HBA Manager tries to keep the devices and the LUNs that the HBA
displays current. When cables are pulled, devices hot plugged into the SAN, or
devices are removed, SANsurfer FC HBA Manager generates a configuration alarm
in the alarm log.
Perform the following steps to set how the SANsurfer FC HBA Manager GUI handles
configuration changes:
1. Do one of the following:
❑ On the SANsurfer FC HBA Manager main window Settings menu, select
Options.
❑ Right-click the HBA tree. From the pop-up menu, click Options.
❑ Press CTRL+SHIFT+O.
The Options dialog box displays (see figure 6-7).
Figure 6-7. Options Dialog Box—Configuration Change Alarm Section