User`s guide

6 – Getting Started
Setting the Event Log Options
6-14 FS0054603-00 C
Q
6.9
Setting the Event Log Options
Perform the following steps to set the number of events the event log can list and
the logging of informational and warning events.
NOTE: See section 8.1 for information about viewing the event log.
1. Do one of the following:
❑ On the SANsurfer FC HBA Manager main window Settings menu, select
Options.
❑ Right-click the HBA tree. From the pop-up menu, click Options.
❑ Press CTRL+SHIFT+O.
The Options dialog box displays (see figure 6-9).
Figure 6-9. Options Dialog Box—Event Log Section
2. In the Event Log section Log Size box, type the number of events the event
log can list. The range is 20 to 200 events. The default is 20 events.
3. If you want to enable logging of informational events, select the Event Log
section Log Informational Events check box.
4. If you want to enable logging of warning events, select the Event Log section
Log Warning Events check box.
5. Click OK to return to the SANsurfer FC HBA Manager main window.