Installation guide

128
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
Verifying connectivity to the storage array
You can verify connectivity either with
◆ QLogic SANSurfer, discussed next, or
◆ Server Manager, page 130
Verifying connectivity through QLogic SANSurfer
To verify connectivity through QLogic SANSurfer:
On a Windows Server start the SANsurfer application, which
includes the SANsurfer FC HBA Manager GUI. When complete, the
SANsurfer application GUI displays. (Refer to the SANsurfer FC
HBA Manager main window, as shown in Figure 111 on page 130).
1. Double-click the SANsurfer icon, as shown in Figure 109, on your
desktop (if the icon was created during installation).
Figure 109 SANsurfer icon
2. Click Connect on the SANsurfer FC HBA Manager main
window toolbar.
3. On the SANsurfer FC HBA Manager main window Host menu,
click Connect.
4. Right-click the HBA tree. From the shortcut menu, click Connect.
5. Press HOME.
The Connect to Host dialog box displays, as shown in Figure 110
on page 129.