Installation guide

Manually installing the adapter driver – Advanced users
165
Miscellaneous Planning and Procedures
7. Perform one of the following:
• For Windows 2000, click the Next button on the welcome
screen. On the next screen, you will be asked what you want
the wizard to do. Click Display a list of known drivers for
this device so that I can choose a specific driver and then
click Next. Continue to Step 8.
• For Windows 2000 and 2003, you will be asked if you wish to
connect to Windows Update to search for software. Click No,
not at this time and then click Next. On the next screen, you
will be asked to whether you want to install software
automatically or to install software from a list or generic
location. Choose Install from a list or generic location
[Advanced] and click Next. On the next screen, you are asked
to choose your search and installation options. Click Don’t
search. I will choose the driver to install and then click Next.
Select SCSI & RAID Controllers from the list and then click
Next. Continue to Step 8.
• For Windows 2008, you will be asked how you want to search
for the driver. Click Browse my computer for driver software.
On the next screen, you are given options on how to browse
for driver software on your computer. Click the option Let me
pick from a list of device drivers on my computer. Continue
to Step 8.
8. In the next window, click Have Disk.
9. Enter the path to the diskette containing the driver (
A:\, for
example), or use the browse function to locate the driver; then
click OK.
10. Select the appropriate driver for your adapter from the displayed
list and click Next.
Note: If you select the wrong driver, you will receive an Incompatible
Hardware warming message. Select No to cancel the update and return
to the selection windows, and then select the correct driver.
11. If prompted in the next window, click Next. (Windows 2008 may
not display this.)
12. If prompted, click Yes to continue the installation. (Windows 2008
may not display this.)
13. Click Finish to complete the installation.Windows 2008 will have
a Close button.