Installation guide

196
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Third-Party Software
QLogic SANsurfer SANblade Manager
EMC has approved the use of a specialized version of the QLogic
SANsurfer SANblade Manager for use with attached EMC
Symmetrix, VNX series, or CLARiiON storage systems. Only the
versions listed below should be used; these versions are posted in the
EMC section on the QLogic website.
This Windows utility provides information on the installed QLogic
adapters, driver versions, mapped targets, statistics, and
configuration settings. It also has a feature to update the adapter
firmware/BIOS and NVRAM. (You should obtain the latest
EMC-approved firmware/BIOS and NVRAM files from the QLogic
website. Refer to “Downloading latest QLogic
drivers/firmware/BIOS files” on page 16 for instructions.)
For information on the use and features of the QLogic SANsurfer
SANblade Manager utility, refer to the documentation posted with
this utility.