Installation guide

94
EMC Host Connectivity with QLogic Fibre Channel HBAs and CNAs in the Windows Environment
Installation and Configuration
2. Click Utilities in the right pane of the SANsurfer utility.
3. Under the Utilities tab, shown in Figure 71, you will see several
sections that allow you to update the CNA flash, HBA
parameters, and the CNA driver. To update the Fibre Channel
BIOS and firmware of the adapter, click Update Entire Image.
Figure 71 Utilities tab
4. An Open dialog box displays, as shown in Figure 72 on page 95.
Browse to the location of your firmware file that you wish to load.
This file could be included on EMC-Approved installation media,
or can be downloaded from the QLogic website as described
“Downloading latest QLogic drivers/firmware/BIOS files” on
page 16.