User`s guide

11 – Updating the HBA
Restoring an HBA’s Firmware Parameters to the Factory Defaults
IS0054602-00 A 11-7
Q
11.2
Restoring an HBA’s Firmware Parameters to the Factory Defaults
Perform the following steps to reset the HBA’s firmware parameters to the factory
defaults:
1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA
port. Click the HBA Options tab; click the Firmware tab. The HBA Options
tabbed page (Firmware tab) displays (see figure 11-5).
Figure 11-5. HBA Options Tabbed Page (Firmware Tab)
The HBA port information displays:
❑ HBA. HBA instance number and HBA model
❑ State. The HBA port state. See section 8.1 for details about the HBA port
state and its correspondence with the HBA icons.
❑ Green background: good
❑ Yellow background: warning
❑ Blue background: unknown
❑ Red background: bad
❑ HBA iSCSI Name. HBA port iSCSI name. The QLogic manufacturing default
name or a name that you assign.
❑ HBA Alias Name. HBA port iSCSI alias name. Symbolic name you assign
to the HBA port for identification purposes.
❑ IP Address. IP address of the HBA port