User`s guide

IS0054602-00 A 5-1
Section 5
Installing SANsurfer iSCSI HBA Manager
Installing the SANsurfer iSCSI HBA Manager application consists of installing the
SANsurfer iSCSI HBA Manager GUI, platform-specific agent, and help components,
as appropriate.
NOTE: Before installing SANsurfer iSCSI HBA Manager, read and follow the
instructions in the documents listed in section 1.1, as applicable.
This section discusses:
■ Initial installation (see section 5.1)
■ Uninstalling the SANsurfer application (see section 5.2)
5.1
Initial Installation
You can install the SANsurfer application (which includes the SANsurfer iSCSI HBA
Manager) using the software from the QLogic Web site or from the SANsurfer
CD-ROM.
NOTE:
■ Be sure to install the same version of the SANsurfer application on all
systems in the network.
■ If you have a previous version of the SANsurfer application (for example,
QMS 1.0 or QMS 2.0 (QMSJ)), uninstall these applications before
installing the SANsurfer application.
■ Make sure that SANsurfer Control iX is not running on a system in which
a SANsurfer iSCSI HBA Manager server agent (SANsurfer iSCSI
Windows NT 4/2000/2003 Agent, SANsurfer iSCSI Linux Agent, or
SANsurfer iSCSI Solaris Agent) is installed.
■ Installing and running SANsurfer Control iX and the SANsurfer iSCSI HBA
Manager GUI (GUI only, not the agent) on the same system is supported.
When using only the SANsurfer iSCSI HBA Manager GUI, this system
monitors QLA4xxx HBAs on remote systems on the same network.